Whirlpool WFW9700VW Use and Care Guide - Page 15

To unlock the controls Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until the status light turns off. NOTE: To lock or unlock the controls when the washer is off, press and hold CONTROLS LOCK/UNLOCK for 3 seconds. Preset cycle settings Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart. Cycle Whitest Whites Heavy Duty Bulky Items Active Wear Normal/ Casual Delicate Wool Silk Soil Level Water Temp Hot/Cold Hot/Cold Warm/Cold Warm/Cold Warm/Cold Warm/Cold Warm/Cold Cold/Cold Cold/Cold Warm/Cold N/A Warm/Cold Cold/Cold N/A Spin Speed Extra High Extra High Low Medium High Medium Medium No Spin Low Extra High N/A No Spin Extra High Extra High Door Locked When the status light glows, the door is locked. (cycle time) Normal (1:20) Normal (1:10) Normal (0:55) Normal (0:40) Normal (0:50) Normal (0:40) Normal (0:30) Normal (0:25) Normal (0:30) Light (0:25) N/A (0:65) Normal (0:30) Normal (0:22) Normal (0:13) Sensing/Revising Estimated Time The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load. The washer will automatically sense the progress in the cycle and adjust the Estimated Time Remaining display. While the washer is sensing, the estimated time will flash and the Sensing status light will glow. When the sensing is complete, the flashing stops, the status light goes off, and the Estimated Time Remaining display is updated. The cycle time will be extended if oversudsing occurs or the load is unbalanced. The SUD routine removes extra suds and assures proper rinsing of your garments. See "Troubleshooting." During the unbalance routine, the time displayed may pause until this activity is complete, then resume with the remainder of the cycle. Clean Washer Reminder The Clean Washer Reminder light illuminates to remind you to use the Clean Washer cycle regularly. The reminder light will illuminate every 30 cycles. The reminder light may be reset by either running the Clean Washer cycle, or by pressing the CLEAN WASHER RESET button. Hand Washables Quick Wash (2-3 items) Clean Washer Soak Rinse/Spin Drain/Spin Cycles Cycles can be selected by turning the Cycle Control knob to the desired cycle. Each cycle is designed for different types of fabric and soil levels. The modifier indicator lights, on the right-hand side of the panel, will change as cycles are selected. To change the preset cycle settings Press the selector of each available setting until the desired setting glows green. Whitest Whites This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines fast-speed tumbling, longer wash time, and extra high speed spin to shorten drying time.