Whirlpool WGD5800S Installation Instructions - Page 2

I tWheARrNisINk Go:f firFeoroyr oeuxrplsoasfieotny,, tohretoinfporremvaetniot n proinpetrhtiys mdaamnuagale, mpuesrtsobnealfolilnojwueryd, otor dmeiantihm.ize - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. - WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Clear the room, building, or area of all occupants. • Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. • If you cannot reach your gas supplier, call the fire department. - Installation and service must be performed by a qualified installer, service agency, or the gas supplier. In the State of Massachusetts, the following installation instructions apply: _, Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. _, If using a ball valve, it shall be a T-handle type. _, A flexible gas connector, when used, must not exceed 3 feet. INSTALLATIONINSTRUCTIONS Check that you have everything necessary for correct installation. Proper installation is your responsibility. 8" or 10" pipe wrench 8" or 10" adjustable wrench (for gas connections) Flat-blade screwdriver Adjustable wrench that opens to 1" (2.5 cm) or hex-head socket wrench (for adjusting dryer feet) Level 1/4"nut driver or socket wrench • Knife • Safety glasses • Vent clamps • Pipe-joint compound resistant to L.R gas • Caulking gun and compound (for installing new exhaust vent) • Gloves • Pliers Parts supplied: Remove parts package from dryer drum. Check that all parts were included. 2 4 leveling legs Parts needed: Check local codes and consult gas supplier. Check existing gas supply, electrical supply and venting, and read "Electrical Requirements," "Gas Supply Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require special parts (listed following) that may be ordered by calling the dealer from whom you purchased your dryer. For further information, please reference the front page of your "Dryer User Instructions." • Mobile home installation kit. Ask for Part Number 346764. • Metal exhaust system hardware.