Xerox 7400DN User Guide - Page 12

Printer Configurations Options The following options are available on the Phaser 7400 Color Printer. Print the Configuration page to see which options are installed on your printer. To print the Configuration page, see Information Pages on page 1-10. Available Trays Tray 1 (MPT) and Tray 2 are standard on all configurations. The following additional tray combinations are supported: ■ Tray 3: One 550-Sheet Feeder (standard on the Phaser 7400DT printer) ■ Trays 3 and 4: Two 550-Sheet Feeders ■ Trays 3-5: One 1650-Sheet High-Capactiy Feeder (standard on the Phaser 7400DX printer) ■ Trays 3-6: One 550-Sheet Feeder and one 1650-Sheet High-Capacity Feeder (standard on the Phaser 7400DXF printer) Finisher The finisher provides stapling, saddle stapling, and hole punching for a variety of paper and media. It is available with either a 2- / 3-hole punch (110 V finisher) or a 4-hole punch (220 V finisher). The finisher is standard on Phaser 7400 DXF printers, and is optional on all other configurations. The finisher requires a hard drive, a 550-Sheet Feeder, and a 1650-Sheet High-Capacity Feeder. Memory All configurations have two memory slots supporting 256 MB and 512 MB SODIMM modules (up to a maximum of 1 GB). Internal Hard Drive The following printing options are available with the optional hard drive: ■ Secure Print Jobs ■ Proof Print Jobs ■ Personal Print Jobs ■ Saved Print Jobs Duplex Unit A Duplex Unit can be added to the Phaser 7400N printer to provide automatic 2-sided printing. The Duplex Unit is standard on all other configurations. Phaser® 7400 Color Printer 1-7