Xerox 7400DN User Guide - Page 61
Printing on Specialty Media, Printing Transparencies - canada
UPC - 095205676686
View all Xerox 7400DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Printing on Specialty Media Printing on Specialty Media This section includes: ■ Printing Transparencies on page 3-32 ■ Printing Envelopes on page 3-37 ■ Printing Labels on page 3-40 ■ Printing Glossy Paper on page 42 ■ Printing Custom Size Paper on page 3-45 For information about printing on other types of specialty media, see the Advanced Features Guide at www.xerox.com/office/7400support Printing Transparencies Transparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one side only. For best results, use only transparencies that are recommended for your printer. For more information, see the Recommended Media List at www.xerox.com/office/7400support To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies. Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details. Guidelines ■ Remove all paper before loading transparencies in the tray. ■ Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than 200 transparencies in Tray 2. Overloading the tray may cause the printer to jam. ■ Handle transparencies by the edges using both hands to avoid fingerprints and creases, which can cause poor print quality. ■ After loading the transparencies in the tray, use the control panel to change the paper type to Phaser 35-Series Transparency. Phaser® 7400 Color Printer 3-32