Xerox 7400DN User Guide - Page 89

Solving Print-Quality Problems Solving Print-Quality Problems This section includes: ■ Light or Dark Lines or Smudges in One Color on page 4-5 ■ Dark Lines, Smudges, or Streaks Through All Colors on page 4-9 ■ All Colors Are Too Light or Too Dark on page 4-12 ■ Repeating Defects on page 4-13 ■ Print Image Is Offset on page 4-14 ■ Fusing Is Incomplete or Toner Is Flaking on page 4-15 ■ Color Misregistration on page 4-16 ■ Printed Area Does Not Fit on the Paper or Margins Are Incorrect on page 4-20 See also: Knowledge Base at www.xerox.com/office/7400support Light or Dark Lines or Smudges in One Color Problem Thin, light or white lines appear in only one color. Thin, dark lines or smudges appear in only one color when a light color is faded or blended with black. Print a copy of the color test pages to determine whether the problem is in one color or more than one color: 1. On the control panel, select Troubleshooting, and then press the OK button. 2. Select Print Quality Problems, and then press the OK button. 3. Select Color Test Pages, and then press the OK button to print the test pages. ■ If the problem appears in one color on the test pages, continue with the solution in this section. ■ If the problem appears in more than one color on the test pages, see Dark Lines, Smudges, or Streaks Through All Colors on page 4-9. Phaser® 7400 Color Printer 4-5