Xerox 750DX Fiery SI Color Server Getting Started - Page 27
C:\fierysi\appl_tsr.exe, Call C:\phonenet\aboth, Copsnode, Copslpt, Copshare
![]() |
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
16 Installing user software on a PC-compatible computer From this location: Drag these files: NWPOPUP.EXE NETWARE.DRV NWGDI.DLL IPXODI.COM To this location: TO VERIFY THE INFORMATION IN THE NET.CFG FILE FOR WINDOWS 3.1 AND IPX: • In the Link Driver section of the file, make sure that the Ethernet Frame Type matches what is set on your Fiery SI. You can print the Configuration page from the Fiery SI Control Panel to see the current setting. TO MODIFY THE AUTOEXEC.BAT FILE FOR WINDOWS 3.1X AND APPLETALK: 1. Make a backup copy of your AUTOEXEC.BAT file and give it a unique name. This file is usually stored in the C directory, at the root level. It is always a good idea to make a backup copy of your AUTOEXEC.BAT file before you change it. 2. Use a text editor to open the AUTOEXEC.BAT file. 3. After the network software commands or at the end of the file, add the following lines: C:\FierySI\APPL_TSR.EXE C:\FierySI\APPLINIT.EXE If you are using PhoneNET PC, insert the lines after the CALL C:\PHONENET\ABOTH command. If you are using COPSTalk, insert the lines after the last of the following commands: COPSNODE, COPSLPT, COPSHARE, CSHARE. (The last three may not be present; they are optional.) If your system uses a drive letter other than C: or you named the FierySI directory something other than "FierySI," type the correct path for your system.
![](/manual_guide/products/xerox-750dp-fiery-si-color-server-getting-started-f796045/27.png)