Xerox 750DX Fiery SI Color Server User Guide - Page 84
The Macintosh ADB port provides power to the DTP32.
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
66-6 Color Calibration 3. If you are using a Macintosh, attach the round 4-pin mini-connector to one of the Apple Desktop Bus (ADB) ports. The Macintosh ADB port provides power to the DTP32. 4. If you are using a PC, a Macintosh without an ADB port available (or a PowerBook), or the Fiery SI, use the optional AC adapter (available from X-Rite) to provide power. If you use the optional AC adapter, plug the small connector on the adapter cable into the side of the X-Rite DTP32 and plug the adapter into a wall outlet. Small connector AC adapter TO CONNECT THE X-RITE DTP32 TO A POWERBOOK: 1. Turn the PowerBook off. 2. Connect the network cable to the PowerBook's EtherTalk port. 3. Plug the square end of the densitometer interface cable into the I/O port on the side of the X-Rite DTP32. 4. Attach the round 8-pin mini-connector to the serial port on the PowerBook. 5. If the densitometer display indicates that densitometer battery power is low, use the external AC adapter for the densitometer. NOTE: Don't connect the densitometer to the PowerBook ADB port.