Xerox 790N Fiery SI Color Server Administration Guide - Page 64
Configuring a NetWare server for printing, At the Fiery SI Control Panel, in Network Setup
![]() |
UPC - 042215474368
View all Xerox 790N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
33-4 Setting up network servers Configuring a NetWare server for printing The following sections explain how to set up a NetWare file server so that networked users can print to the Fiery SI from their workstations, and the Fiery SI can obtain print jobs from the NetWare server. You can route all Fiery SI print jobs through the same NetWare file server, or you can configure more than one file server to handle Fiery SI jobs. For Ethernet or token ring, each Fiery SI connection requires a separate NetWare file server on which a print server and print queue have been configured. For each NetWare file server that you configure, follow these general steps. More detail is provided in subsequent sections. 1. Make sure the server is connected to a functioning IPX network. 2. Log in as the Supervisor on a PC connected to the NetWare file server. 3. For NetWare 4.x installations only, you'll set the bindery context (see page 3-6). 4. Set up a new print server and print queue (see page 3-9). 5. At the Fiery SI Control Panel, in Network Setup, choose Ethernet Setup and IPX (Novell) Setup. Enable IPX (Novell), add support for the NetWare file server and the new print server you configured, and select a poll interval (see page 2-14). 6. In Printer Setup, select the color server connection (Direct, Print queue, or Hold queue) for the print server you created (see page 2-24).
![](/manual_guide/products/xerox-750dp-fiery-si-color-server-administration-guide-5bc20ba/64.png)