Xerox 8400DP Reference Guide - Page 23

Printer Settings Using CentreWare IS To select Intelligent Ready mode or to schedule warmup/standby settings: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Select Properties. 4. Select the General folder on the left sidebar. 5. Select Warmup. 6. Click the Warmup Mode drop-down list and select Intelligent Ready, Scheduled, or Job Activated. 7. If you select Scheduled in Step 5, make selections for each day's warmup setting and standby setting. 8. Click Save Changes at the bottom of the screen. Note Although the front panel selections only allow you to turn Intelligent Ready Mode on or off, CentreWare IS allows you to specify particular printer Warmup Modes and settings. Accessing Protected Mode Using CentreWare IS To enter or exit Protected Mode: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Click the General folder on the left sidebar, then click Printer Defaults. 5. Click the Front Panel Menu drop-down list, then select On or Off. ■ Select On to have all menus available. ■ Select Off to limit the printer setup items. 6. Click Save Changes at the bottom of the page. Accessing Load Paper Timeout When your print job is formatted for a type or size of paper that is not loaded in the printer, the printer's front panel displays a message requesting you to load the appropriate paper. The Load Paper Timeout controls the amount of time the printer waits before printing on another type or size of paper. To change the load paper timeout, use either: ■ The printer's front panel ■ CentreWare IS Phaser® 8400 Color Printer 1-16