Xerox 8400DP Reference Guide - Page 24
Selecting Tray Settings, Using the Printer's Front Panel, Using CentreWare IS, Selecting Trays
UPC - 095205323689
View all Xerox 8400DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Printer Settings Using the Printer's Front Panel To change the load paper timeout: 1. Select Printer Setup, then press the OK button. 2. Select Paper Handling Setup, then press the OK button. 3. Select Load Paper Timeout, then press the OK button. 4. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 hour or 24 hours) indicate the length of time you want the printer to wait for you to load paper before printing. If you select a value of None, the printer does not wait for paper to be inserted and immediately picks paper from the default tray. 5. Press the OK button to save the change. Using CentreWare IS To change the load paper timeout: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Click the General folder on the left sidebar, then click Printer Defaults. 5. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None, 1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to wait for you to load paper before printing. If you select a value of None, the printer does not wait for paper to be inserted and immediately picks paper from the default tray. 6. Click Save Changes at the bottom of the screen. Selecting Tray Settings Selecting Trays You can select trays by two different methods: ■ The printer's front panel ■ CentreWare IS Phaser® 8400 Color Printer 1-17