Xerox D105 User Manual - Page 24

XEROX 2.14 10.Hard Drive Setup Step 5: Press >> to enter the Hard Drive Setup menu and you should see the following screen. Hard Drive Setup 1.Select Partition Step 6: Load your master disc on to the hard drive. To do so, use up or down arrow button to navigate to the following screen. Hard Drive Setup 2.Load Partition Step 7: Press >> to enter the Load Partition menu and you should see the following screen. Load Partition [70GB] Load ->New Partition ■ 70GB indicates the total capacity of your hard drive in terms of Gigabytes. You now have a choice to load your master disc into a new (empty) partition or overwrite one of the existing partitions (if any exists, including reserved partitions) by inputting and modifying the name you desire or you can simply choose "Auto Generate" to have the system automatically generate a partition name for you. Afterwards, simply press the up or down arrow button to find your desired selection and press >> to submit your selection. You should see the following screen (unless you have chosen auto generate, then skip to Step 11). Edit Partition Name [ ] OK? Step 8: You can now name the partition you are about to load into the hard drive. To enter the name, you need to use the up or down buttons to select the character and use >> or