Xerox D105 User Manual - Page 29
How to make a Copy from the Hard Drive, Start the Copying Process
![]() |
View all Xerox D105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
How to make a Copy from the Hard Drive NOTE: In this tutorial, the term partition(s) is also used to refer to image files in the hard drive. Step 1: Make sure the master Reading Source is set to hard drive. It is very important to make sure the master Reading Source is set to the hard drive in order to avoid unnecessary error messages. To check the master Reading Source, use the up or down arrow button to navigate to the following screen. XEROX 2.14 8.Select Source Step 2: Press >> to enter the Select Source menu and you should see the following screen. Hard Drive Port 0.0 HITACHI HDS721616PL Make sure it is located at the hard drive. If not, you need to press the up or down navigation button to search for it. Step 3: Press >> to submit your selection. After your selection has been submitted, you should see the following screen. XEROX 2.14 8.Select Source Step 4: Go back to the Copy menu. Use up or down arrow button to navigate to the following screen. XEROX 1. Copy 2.14 Step 5: Start the Copying Process Insert your blank discs into the writer trays (make sure the Reader tray is empty) and press >> button to enter Copy menu. You will be asked to choose which hard drive partition to copy from. 29 Xerox Duplicator
![](/manual_guide/products/xerox-d105-user-manual-ba8e6c3/29.png)