Xerox D105 User Manual - Page 35
How to Select the Duplication Speed, Xerox Duplicator, Poor Blank Media Quality
![]() |
View all Xerox D105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
How to Select the Duplication Speed This process will allow you to adjust the duplication speed subject to your various needs. By default, the duplication speed will be set to the optimal speed. However, under some circumstances, you might want to lower down the duplication speed. Those circumstances are as follows: ■ Poor Blank Media Quality. When your media quality is not good, lowering down the duplication speed is necessary to make good copies. ■ Poor Master Disc Quality. If your master disc condition is not good, lowering down the duplication speed will reduce the failure rates greatly. ■ Duplication Quality. Overall, the lower the speed, the higher the quality of your duplicates. If you have time, it is a good choice to lower down the speed to produce the best quality duplicates. When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready. XEROX 1. Copy 2.14 Step 1: Navigate to Speed Selection menu. Press the up or down arrow button to navigate to the following screen. XEROX 2.14 7. Select Burn Speed Step 2: Enter Speed Selection menu. Then, you can press >> button to enter into Speed Selection menu. You should see the following screen. Select Burn Speed CD to CD Select the Duplication Speed Type There are different types of recording speeds. ■ HDD/CD to CD. Copying to CD-R/RW media from pre-loaded CD partitions or original CD media. 35 Xerox Duplicator
![](/manual_guide/products/xerox-d105-user-manual-ba8e6c3/35.png)