Xerox D105 User Manual - Page 42

How to Change the Setup Settings Most of the internal settings and information is stored inside the Setup menu. To explore and modify them is simple. Following is an example of how to modify the Auto Start setting. Note that the default setup is set for optimal performance of the duplicator; it is unnecessary to change if you are satisfied with the outcome. Step 1: Use the up or down arrow button to navigate to the following screen. XEROX 12. Setup 2.14 Step 2: Press >> to enter Setup menu and you should see the following screen. Setup 1. Language Step 3: Use the up or down arrow button to navigate to the following screen. Setup 2. Auto Start Step 4: Press >> to enter Auto Start Setting menu and you should see the following screen. Auto Start Auto Step 5: Use the up or down arrow button to modify the setting to Full and then press >> to submit your selection. You should see the following screen. Setup 2. Auto Start Step 6: If you would like to modify more settings, then go back to Step 3. Otherwise, press