Xerox M118 System Administration Guide - Page 28
Ethernet Port, Resident Fonts - driver download
UPC - 095205219258
View all Xerox M118 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2 Product Overview Ethernet Port The Ethernet port is the default interface used on the machine. If you need to change the speed setting of the Ethernet port, perform the following steps: 1. Select [Print Settings] on the [System Settings] screen, and press the button. 2. Press the button on the [Network/Port] screen. 3. Select [Ethernet Settings] by selecting [T] or [S] using the button. 4. Press the button. 5. Select port speed by selecting [T] or [S] using the button. 6. Press the button. Auto Detects transmission speed automatically at power on and adjusts itself accordingly. 100BASE-TX Sets the transmission speed to 100 Mbps. 10BASE-T Sets the network speed to 10 Mbps. Resident Fonts PCL Resident Fonts One of the fonts in the following table can be selected as the default font for the machine. Other bitmap and scalable fonts can be downloaded with print jobs sent to the machine using printer drivers. The default is used when a font is not defined in the PCL job stream. The PCL versions used are PCL5e and PCL6. You can view the PCL fonts by printing the Fonts List. For more information on how to print the list, refer to Product Overview chapter of the User Guide. 28 Xerox CopyCentre/WorkCentre 118 System Administration Guide