Xerox PE16 User Guide - Page 119
Display, Meaning, Suggested solutions, Line Busy, Line Error, Load Document, Memory Full, No Answer
View all Xerox PE16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Display Line Busy Line Error Load Document LSU Error Memory Full No Answer No Cartridge No. Not Assigned No Paper Operation Not Assigned Meaning Suggested solutions The remote party did not answer or the line is already engaged. Try again after a few minutes. Your machine cannot connect with the remote machine or has lost contact because of a problem with the phone line. Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on. See the Facsimile User's Guide. You have attempted to set up a copy or fax operation with no document loaded. Load a document and try again. A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. The memory is full. Delete unnecessary documents, retransmit after more memory becomes available or split the transmission into more than one operation. The remote fax machine has not answered after several redial attempts. Try again. Make sure that the remote machine is operational. The toner cartridge is not installed. Install the toner cartridge. See page 1.9. The speed dial location you tried to use has no number assigned to it. Dial the number manually using the number keypad or assign the number. See the Facsimile User's Guide. The paper in the paper tray has run out. Load paper in the paper tray. See page 1.11. You are doing in the Add/ Cancel operation, but there is no jobs waiting. Check the display to see if there is any scheduled job. The display should indicate them in Standby Mode, for example, Delay Fax. 8.12 TROUBLESHOOTING