Xerox XD103F User Guide - Page 36

Customizing Your WorkCentre Programmable Features The default settings for various machine features may be changed to suit your individual needs. All of these features remain set until this process is repeated. Each of the programmable features, along with its program number and options are contained in the chart below. The procedure to change the default settings follows the chart. Note: The procedures written in this manual are based on the factory default settings. Feature Priority Tray: This feature allows you to set the default paper tray. At power on or auto clear, the copier will return to the selected priority paper tray. (Model XD104/105f/120f//130df/155df only.) Auto Clear Time Out: This feature allows you to select the time it takes for the copier to return to the normal copy mode after a copy cycle is complete. Time Out to Power Save: When enabled, this feature automatically reduces power used by the copier if the copier has not been used for the set period of time. Time Out to Power Shut-Off: When enabled, this feature significantly reduces power used by the copier if the copier has not been used for the set period of time. Default Magnification: This feature allows you to make copies slightly larger or smaller than the original, or the same size. Program Number 0 1 2 3 4 Option Number * Factory Setting 0 - Main paper tray * 1 - Alternate paper tray 2 - Second paper tray 0 - Off 1 - 30 seconds 2 - 60 seconds * 3 - 90 seconds 4 - 120 seconds 0 - Off 1 - 45 seconds 2 - 90 seconds * 3 - 2 minutes 4 - 5 minutes 0 - 2 minutes 1 - 5 minutes * 2 - 15 minutes 3 - 30 minutes 4 - 60 minutes 5 - 120 minutes 6 - Off 0 - 100% * 1 - 99% 2 - 101% 28