Yamaha 02R Owner's Manual - Page 136

26 Mixing and Monitoring Analog Inputs The Digital Recording Console 02R is equipped with 24 individual analog input connectors. The first sixteen channels, 1 through 16, are monophonic input channels designed for microphone to line level signal inputs. The last eight channels, 17 through 24, are stereo pairs designed for line level signals only. INPUT 23 INPUT 21 INPUT 19 INPUT 17 INPUT A INPUT A INPUT A INPUT A INPUT A INPUT A INPUT A INPUT A INPUT B INPUT B INPUT B INPUT B INPUT B INPUT B INPUT B INPUT B INPUT 24 INPUT INPUT INPUT 22 20 18 INPUT INPUT INPUT 16 15 14 INPUT 13 INPUT 12 INPUT 11 INPUT 10 INPUT INSERT 9 I/O 0dB 8 INSERT I/O 0dB 7 INSERT I/O 0dB 6 INSERT I/O 0dB 5 INSERT I/O 0dB 4 INSERT I/O 0dB 3 INSERT I/O 0dB 2 INSERT I/O 0dB 1 In addition, the first eight channels not only have selectable input connectors, XLR-type or phone, but they also have an insert connector, allowing you to patch external signal processors before the input signal is converted to digital. For monitoring the output of a stereo tape recorder or another similar analog device, the 02R also has two pairs of 2TR IN phone connectors. Phantom Power +48V ON OFF Phantom power provides a +48 V DC power source for condenser type microphones. It is applied to the XLR-type connectors (INPUT A) for input channels 1 through 8. The phantom power switch for each channel is used to turn it ON and OFF. Phantom power is applied to each individual input. A Phantom power can only be applied to the XLR-type connectors B (INPUT A) for input channels 1 through 8. Select those connectors with the A/B switch: up for A, down for B. With phantom power set to ON, non-phantom powered microphones, dynamic microphones, and balanced line-level sources can still be connected to INPUT A connectors for input channels 1 through 8. However, be careful with unbalanced sources. Digital Recording Console 02R User's Guide