Yamaha 02R Owner's Manual - Page 285

Installing Options 175 Installing 02R Options Single Slot Cards 1. Turn OFF the power to the 02R by pressing the POWER switch on the back panel. TO PREVENT ELECTRICAL SHOCK, ENSURE THE 02R IS POWERED OFF BEFORE YOU OPEN ANY OF THE OPTIONAL SLOT COVERS! Note: Before you install a card in the 02R, be certain to turn the power off. Not only do you risk electrical shock, you can also damage either the 02R or the optional card. You will also invalidate any warranties for the Digital Recording Console 02R or the optional cards. 2. Remove the cover plate from the slot in which you intend to insert the optional card. Note: You should save the cover plates for possible later use. You should also never operate the 02R with one of the slots uncovered. This disrupts the flow of air through the power supply and other components and can cause premature failure of internal components. 3. Insert the optional card as shown in the diagram: When you insert the card, press it firmly into the slot to make certain the connector on the card edge seats firmly on the bus slot inside the 02R. Make sure the card is properly secured with the screws that held the cover plate in place. 4. Turn ON the power to the 02R. Verify that the card has been recognized by the system software by pressing the [DIGITAL I/O] button until the "Word Clock Select" screen appears (see "Word Clock Select" on page 154 of the User's Guide). If the card was installed properly, the system software should correctly identify it in the appropriate slot. Digital Recording Console 02R User's Guide