Yamaha 02R Owner's Manual - Page 25

16 Getting Started Power ON/OFF POWER ON/ OFF This section explains how to power the Digital Recording Console 02R on and off. Power ON It is always important to observe the correct order for powering up equipment in a studio. Always start with the multitrack and mastering recorders and the signal processors, then the 02R, and finally the monitoring amplifiers and other downstream gear. 1. Turn ON the power to the 02R by pressing the POWER switch on the back panel. The 02R start-up screen appears for a few seconds, the faders initialize themselves, then the screen that was used when the 02R was last powered off appears. Power OFF It is always important to observe the correct order for powering up equipment in a studio. Always start with the monitoring amplifiers and other downstream gear, then the 02R, and finally the multitrack and mastering recorders and the signal processors. 1. Turn OFF the power to the 02R by pressing the POWER switch on the back panel. All mix settings, mix scenes, and other data are stored when the 02R is powered off. Setting the Synchronization Before you use the 02R with a modular digital multitrack recorder or DAT master recorder, be sure to correctly set the synchronization. The 02R must be slaved to an external wordclock in order to process the input digital signals without drop-out or distortion. Refer to the section "Word Clock Select" on page 154 of the User's Guide. Look in the chapter "Installing Options" on page 171 of the User's Guide. There is a section for each of the optional digital I/O cards that the 02R supports. Refer to the appropriate section for the card installed in your unit. Digital Recording Console 02R Getting Started Guide