Yamaha 02R Owner's Manual - Page 33

24 Introductory Recording Tutorial Applying EQ The next step is to apply equalization to MIC/LINE 1. The Digital Recording Console 02R has a four-band fully parametric equalizer, with variable bandwidth (Q), frequency (F), and gain (G). The power of the 02R user interface means that there are two ways of adjusting the equalization for MIC/LINE 1. One method is to use the EQUALIZER display function. The more convenient method is to use the buttons and controls of the EQUALIZER block of the SELECTED CHANNEL controls. Q LOW/HPF L-MID H-MID HIGH/LPF EQ ON EQUALIZER F Hz kHz G dB Note: You can customize your 02R so that when you adjust a control of the EQUALIZER block of the SELECTED CHANNEL controls, the EQUALIZER display function automatically appears on the screen. See "Preferences" on page 162 of the User's Guide for more information. The default setting is to automatically display the EQUALIZER screen. This tutorial will describe the operation of the EQUALIZER display function, even though it will be immediately obvious to you that using the dedicated buttons and controls of the EQUALIZER block of the SELECTED CHANNEL group is the more convenient method. The purpose of this tutorial is to show you how to use the 02R. For consistency, the tutorials will focus on the display functions, but you should use the dedicated controls of the SELECTED CHANNEL group as much as you can. Turning the Equalizer ON/OFF 1. Press the [SEL] button for MIC/LINE 1. SEL When you press the [SEL] button for a channel, the LED and numeric indicators of the SELECTED CHANNEL controls change to reflect the status of the channel you pressed. Digital Recording Console 02R Getting Started Guide