Yamaha 505 Owner's Manual - Page 112
Attach B and C to A., Fix E to D using two short screws., Raise A to the standing position.
View all Yamaha 505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
3 Attach B and C to A. 1 Align parts B and A so that the protrusion fits into the hole. 3 5 Attach D to A. 1 Fix D to the bottom surface of A using two short screws. A BB 2 Fix the side of the speaker box using two short screws. D A 2 Fix the bottom surface of the unit using two long screws. A B Attach the parts, pressing B onto A so that the two fit tightly together. 3 Fix the side of the speaker box using two short screws. If the screw holes do not align, loosen the other screws and adjust the position of B. A If the screw holes do not align, loosen the other screws and adjust the position of D. 6 Raise A to the standing position. Use the front legs as support to raise A. CAUTION • Be careful not to pinch your fingers. • When you raise the unit, do not hold the key cover. A A B 4 Fix C in the same way. Tighten the screws after attaching the washers to the short screws. 4 Fix E to D using two short screws. 7 Install F. 1 Remove the plastic cover from D. D 2 Untie and straighten out the bundled cord attached to the bottom of F. F E D D 3 Pass the pedal cord from F under D to the backside of A. F 4 Attach F. Use three thin screws. CVP-509/505: Keyboard Stand Assembly 112 CVP-509/505/503/501 Owner's Manual