Yamaha 6FX Owner's Manual - Page 25
Setting Up, Setup Procedure, Setup Examples
View all Yamaha 6FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Setting Up Setup Procedure (1) Before connecting to microphones and instruments, be sure that all devices are turned off. Also be sure that all of the mixer's channel faders and master control faders are set all the way down. (2) For each connection, connect one end of the cable to the relevant microphone or instrument and connect the other end to the appropriate LINE or MIC jack on the mixer. (LINE jacks: CHs 1 to 8. MIC jacks: CHs 1 to 8, 9/10, 11/12.) NOTE Where an input channel provides both a MIC jack and a LINE jack, you may use either one of these jacks but you may not use both at the same time. Please connect to only one of these jacks on each channel. (3) To avoid causing damage to speakers, power up the devices in the following order: Peripheral devices → mixer → power amps (or powered speakers). NOTE When shutting the system down, turn off the power in the opposite order: Power amps (powered speakers) → mixer → peripheral devices. Setup Examples I Home Recording Effector Rhythm Machine Effector Effector Synthesizer MTR Guitar Sound Source (CD, MD, DAT, cassette, video, etc.) Powered Monitor Speakers Master Recorder (MD, CD-R, DAT, etc.) Personal Computer MTR Microphone Headphones MG16/6FX 25