Yamaha A-S1100 Owners Manual - Page 12

Controls and functions ■ Remote control 1 AMP OPEN/CLOSE CD 2 LINE 1 LINE 2 3 PHONO MAIN DIRECT CD TUNER BAND 5 4 PRESET SOURCE LAYER VOLUME 6 1 Infrared signal transmitter Outputs infrared control signals. 2 p AMP key Turns this unit ON or switches it to STANDBY mode. For details on STANDBY mode, see "Front panel" (page 6). 3 Input select keys Selects the input source. The audio signals of the selected input source are output at the LINE 2 REC jacks. y When LINE 2 is selected as the input source, the audio signals are not output at the LINE 2 REC jacks. LINE: Selects the component connected to the LINE 1 or LINE 2 jacks. PHONO: Selects the turntable connected to the PHONO jacks. MAIN DIRECT: Selects the component connected to the MAIN IN jacks. When MAIN DIRECT is selected as the input source, the audio signals are not output at the PRE OUT, LINE 2 REC and PHONES jacks. CD: Selects the CD player connected to the CD jacks. TUNER: Selects the tuner connected to the TUNER jacks. 4 Tuner control buttons Control functions of Yamaha tuner. Refer to the owner's manual of your tuner for details. Note Certain Yamaha tuners may not respond to some of these control keys on the remote control. MUTE 7 12 En