Yamaha A-S1100 Owners Manual - Page 24

Appendix Specifications POWER SECTION • Rated Output Power [U.S.A, Canada, Taiwan, China, Korea, Australia, U.K. and Europe models] (L/R, 8 , 20 Hz to 20 kHz, 0.07% THD 90 W + 90 W (L/R, 4 , 20 Hz to 20 kHz, 0.07% THD 150 W + 150 W [Asia model] (L/R, 8 , 20 Hz to 20 kHz, 0.07% THD 90 W + 90 W (L/R, 6 , 20 Hz to 20 kHz, 0.07% THD 110 W + 110 W • Dynamic Power (IHF W W W W W W W W • Dynamic Headroom (8 0.67 dB • Maximum Output Power [U.K. and Europe models only] (1 kHz, 0.7% THD, 4 160 W + 160 W • Maximum Effective Output Power (JEITA) [Taiwan, China, Korea, Asia and U.K. models only] (1 kHz, 10% THD, 8 120 W + 120 W (1 kHz, 10% THD, 4 190 W + 190 W • IEC Output Power [U.K. and Europe models only] (1 kHz, 0.02% THD, 8 95 W + 95 W • Power Bandwidth (MAIN L/R, 0.1% THD, 45 W, 8 10 Hz to 50 kHz • Damping Factor (1 kHz, 8 250 or higher • Maximum Input Signal Voltage PHONO MM (1 kHz, 0.5% THD 50 mVrms PHONO MC (1 kHz, 0.5% THD 2.2 mVrms CD, etc. (1 kHz, 0.5% THD 2.80 Vrms • Rated Output Voltage/Output Impedance REC OUT 200 mVrms/1.5 k PRE OUT 1.0 Vrms/1.5 k • Frequency Response CD, etc. (5 Hz to 100 kHz 0/3 dB CD, etc. (20 Hz to 20 kHz 0/0.3 dB • RIAA Equalization Deviation PHONO MM 0.5 dB PHONO MC 0.5 dB • Total Harmonic Distortion Plus Noise PHONO MM to REC OUT (20 Hz to 20 kHz, 2.8 Vrms 0.005% PHONO MC to REC OUT (20 Hz to 20 kHz, 2.8 Vrms 0.02% CD, etc. to SPEAKERS OUT (20 Hz to 20 kHz, 50 W/8 0.025% • Signal to Noise Ratio (IHF-A Network) PHONO MM (5 mVrms, Input shorted 90 dB PHONO MC (500 µVrms, Input shorted 83 dB CD, etc. (200 mVrms, Input shorted 100 dB • Residual Noise (IHF-A Network 50 µVrms CONTROL SECTION • Input Sensitivity/Input Impedance CD, etc 200 mVrms/47 k PHONO MM 2.5 mVrms/47 k PHONO MC 100 µVrms/50  MAIN IN 1.0 Vrms/47 k • Headphone Jack Rated Output Power CD, etc. (1 kHz, 32 , 0.2% THD 25 mW + 25 mW • Channel Separation CD, etc. (Input, 5.1 k Terminated, 1 kHz/10 kHz 74/54 dB or higher PHONO MM (Input shorted, 1 kHz/10 kHz, Vol.:30 dB 90/77 dB or higher PHONO MC (Input shorted, 1 kHz/10 kHz, Vol.:30 dB 66/65 dB or higher • Tone Control Characteristics BASS Boost/Cut (50 Hz 9 dB Turnover Frequency 350 Hz TREBLE Boost/Cut (20 kHz 9 dB Turnover Frequency 3.5 kHz GENERAL • Power Supply [U.S.A and Canada models AC 120 V, 60 Hz [Taiwan model AC 110 V, 60 Hz [China model AC 220 V, 50 Hz [Korea model AC 220 V, 60 Hz [Australia model AC 240 V, 50 Hz [U.K. and Europe models AC 230 V, 50 Hz [Asia model AC 220 - 240 V, 50/60 Hz • Power Consumption [Asia model 250 W [Other models 350 W • Standby Power Consumption 0.3 W • Dimensions (W × H × D 435 × 157 × 463 mm (17-1/8" × 6-1/8" × 18-1/4") • Weight 23.3 kg (51.4 lbs) * Specifications are subject to change without notice. 24 En