Yamaha A-S1100 Owners Manual - Page 21
Connecting a component supporting, the trigger function such as a Yamaha, AV receiver
View all Yamaha A-S1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
■ Connecting a component supporting the trigger function such as a Yamaha AV receiver The operations of this unit can be controlled in synchronization with the operations of the connected component, such as a Yamaha AV receiver (power ON/ STANDBY or MAIN DIRECT input selection). Connect the PRE OUT jacks and the TRIGGER OUT jack of the Yamaha AV receiver to this unit as illustrated below: Rear panel of A-S1100 MAIN IN TRIGGER IN RCA stereo cable Monaural mini-plug cable PRE OUT TRIGGER OUT Yamaha AV receiver, etc. with PRE OUT and TRIGGER OUT jacks When the power of the connected component is turned on, this unit turns on and the input is set to MAIN DIRECT automatically. When MAIN DIRECT is selected as the input source, this unit enters STANDBY mode if the power of the connected component is turned off. Note To enable synchronization, turn off this unit before connecting the component to the MAIN IN jacks. The synchronization cannot be activated when the STANDBY/ON, OFF switch of the unit has been set to OFF. 21 En