Yamaha A-S2100 A-S2100 Owners Manual - Page 18
Connecting the speakers, Connecting the banana plug, Except for Europe models
View all Yamaha A-S2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connections ■ Connecting the speakers 1 Remove approximately 10 mm of insulation from the end of each speaker cable and twist the exposed wires of the cable together to prevent short circuits. ■ Connecting the banana plug (Except for Europe models) First, tighten the knob and then insert the banana plug into the end of the corresponding terminal. 10 mm Banana plug Hole for banana plug: 3.95 mm dia. 2 Unscrew the knob and then insert the bare wire into the hole. ■ Connecting the Y-shaped lug 1 Unscrew the knob and then sandwich the Y- shaped lug between the ring part and base. Hole for speaker cable: 6.0 mm dia. Slide Y-shaped lug 3 Tighten the knob. Terminal screw for Y-shaped lug: 5.8 mm dia. 2 Tighten the knob. Caution When loosening the knob of the speaker terminal, do not rotate it excessively. The knob may come off and pose the danger of being swallowed by a child. Notes • Touching the speaker terminal with a metallic rack may cause short circuit and damage this unit. When installing the unit in a rack, maintain a sufficient clearance to prevent the speaker terminals from touching the rack. • To reduce the risk of electric shock, do not touch the speaker terminal when the unit is turned on. 18 En