Yamaha CDX-396 Owner's Manual - Page 20

TRACK PROGRAMMING FOR RECORDING TO TAPE The unit can program tracks on a disc for recording onto tape. By considering the tape's total possible recording time, the unit will automatically program tracks or help you program tracks so they will fit onto the tape with the least amount of unrecorded space at each end of the tape. Ⅵ Automatic tape-programming The unit will automatically program tracks on a disc with their original order. 2 3 SPACE TEXT/ TIME PEAK TAPE CLEAR PROG 1 2 3 4 6 4 5 6 3 7 8 9 0 +I0 INDEX REPEAT RANDOM 5, 6 1 1 Press to stop the unit. * The peak level search function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 20.) 2 If desired, you can automatically insert additional time space between tracks by pressing SPACE to light up "SPACE" on the display. (Refer to page 12.) SPACE SPACE 3 Press TAPE to show the tape's total possible recording time on the display. CDX-596 TAPE "TAPE 46" turns on. CDX-496, CDX-396 "C-46" turns on. You can select any of the four tape lengths by pressing TAPE. 46 54 (off) 60 90 E-16 If desired, you can also enter the tape's total possible recording time manually. Example: For a C-64 tape (32 minutes on each side), press "6" and "4". 6 4 + 4 Press REPEAT. REPEAT The unit automatically programs tracks for both side A and side B considering the tape's total time. 5 Begin recording on the tape deck, and then press on this unit. 6 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit.