Yamaha CDX-396 Owner's Manual - Page 23

English Ⅵ Random sequential tape-programming The unit will automatically program tracks in random sequential order for recording to tape. REPEAT RANDOM 2 4 3, 4 1 Follow steps 1 - 3 on page 16. 2 Press RANDOM. RANDOM * The unit will automatically program tracks at random for both side A and side B considering the tape's total time. 3 Begin recording on the tape deck, and then press on this unit. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. Notes ● Because programmed data changes every time RANDOM is pressed, the unrecorded space at the end of each side of the tape also varies accordingly. ● All tracks may not be programmed if the tape's length is not enough. To program all tracks, use a tape that is longer than the actual playing time. ● In step 2, you can check the program data for side A and side B. CDX-596 1 23 4 PROGRAM 2468 A 12 CDX-496, CDX-396 1 3 PROGRAM A TOTAL 4 2 1 Shows the number of tracks programmed on each side right after the programming is finished. It is then replaced by the number of the first programmed track on side A. 2 Shows the programmed track numbers on each side. 3 Shows the total time of programmed tracks on each side. 4 Shows the side of the tape. ● Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track. ● CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 3 and 4, press SYNCHRO and then press on this unit's remote control. Recording automatically begins. (For details, refer to page 21.) E-19