Yamaha CLP-320 Owner's Manual - Page 29

27 ENGLISH MIDI Functions You can make detailed adjustments to MIDI settings. MIDI Functions MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the instrument transmits or receives MIDI data. Procedure Setting the transmit channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1-E2 keys. Setting the receive channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4-F5 keys. E2 C1 D 2 C4 E5 F5 2 4 7 9 11 14 16 1 3 5 6 8 1012 13 15 For setting the transmit channels. (C1-D 2) OFF 2 4 7 9 11 14 16 1 3 5 6 8 1012 13 15 1+2 For setting the receive channels. (C4-F5) ALL In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to "OFF." MIDI receive channel is ALL: A "Multi-timbre" Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. MIDI receive channel is 1+2: A "1+2" Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Program change and other like channel messages received will not affect this instrument's panel settings or the notes you play on the keyboard. Local Control ON/OFF "Local Control" refers to the fact that, normally, the keyboard of this instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of this instrument does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. Data for the demo song and 50 piano preset songs cannot be transmitted via MIDI. CAUTION When Local control is turned OFF, the keyboard of this instrument does not play the internal voices. Procedure While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. C6 The highest key CLP-320 Owner's Manual 29