Yamaha CLP-811 Owner's Manual - Page 40

3 At the Clavinova, select function F13 and move to subfunction 13-8 BulkDump. 4 Press [+/YES] to begin the dump. The screen displays Working while transmission is in progress, and then Completed to indicate that the operation is finished. It then returns to the original Bulk Dump screen. 5 When transfer is finished, you can terminate FUNCTION mode and resume normal play. To reload the saved data: 1. Run a MIDI cable from MIDI OUT on the storage device to MIDI IN at the Clavinova. 2. Start transmission from the storage device. (Refer to the device's operation manual.) The Clavinova automatically receives and restores the incoming data. The restored data is then available for normal playback. NOTE • It is not possible to reload data into a different Clavinova model. Data from a CLP-811, for example, can be loaded into another CLP-811, but not into a CLP-611. • You cannot send or receive bulk data while the Clavinova is in RECORDING mode or while it is playing back recorded data. • You cannot receive bulk data while the Clavinova is in FUNCTION mode. • When transmitting bulk data, the Clavinava will not transmit other types of MIDI data and will not recognize incoming MIDI messages. (On CLP-811 only:) F14.MicRevDpt (Microphone reverb depth) This function sets the reverb depth (intensity of reverb effect) applied to microphone input. (Note that this function is not available on the CLP-611.) 1 To access this setting, enter FUNCTION mode and go to main function F14. 1 2 ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO 2 Press [-/NO] or [+/YES] to change the setting. Values: 0,...,20 Default: 10 F14/F15.Backup (Backup ON/OFF settings) (F14 on the CLP-611; F15 on the CLP-811.) The Clavinova's backup feature allows you to retain selected settings while power is off so that they can be restored when power comes back ON. Each BACKUP subfunction sets backup ON or OFF for a specific group of settings. • If backup for a group is set OFF, all settings within that group return to their factory defaults each time power comes on. (A listing of factory defaults appears on page 47.) If backup is set ON, then existing settings are automatically restored. • Memory backup remains effective for about a week, after which all settings will return to their factory defaults. If you wish to retain your settings for a long period of time, please be sure to switch the Clavinova on for at least a few minutes each week. 1 To access this setting, enter FUNCTION mode and go to the main function F14 (CLP-611) or F15 (CLP-811). 1 2 ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO 2 Next, press [+/YES] to enter the subfunction group. Then use [t], [s] to move among the different subfunctions, and [-/NO], [+/YES] to set the values. Subfunctions 14.1/15.1 Voice (Voice settings) 14.2/15.2 MIDI (MIDI settings) 14.3/15.3 Tune (Tuning and temperament settings) 14.4/15.4 Pedal (Pedal settings) 14.5/15.5 Display (Display mode) Values: ON, OFF Default: OFF* * But note that the Backup ON/OFF settings themselves, as well as recorded performance data, are always backed up. 36 CLP-811/611 Configuration Functions (FUNCTION mode)