Yamaha CLP-811 Owner's Manual - Page 56
System Exclusive Messages, Clavinova MIDI compliance, System Exclusive Message, Special operators,
View all Yamaha CLP-811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Effect MIDI Map (REVERB) MSB LSB 00H 01H 02H 03H~ 00H No effect ← ← ← 01H HALL 1 HALL 2 HALL 1 ← 02H ROOM ← ← ← 03H STAGE ← ← ← Effect MIDI Map (VARIATION) MSB LSB 00H 01H 02H 00H~06H No effect ← ← 07H ECHO ← ← 41H CHORUS ← ← 44H SYMPHONIC ← ← 46H TREMOLO ← ← 03H 9. System Exclusive Messages (Clavinova MIDI compliance) [F0H] → [43H] → [73H]→ [xxH] → [nnH] → [F7H] F0H: Exclusive status 43H: Yamaha 73H: Clavinova xxH: Device ID (CLP'96:3BH; CLP common:01H) nnH: Substatus Control nn Internal clock 02H External clock 03H Bulk data: 06H (followed by bulk data) F7H: End Of Exclusive * Substatuses 02H and 03H can be received by Device ID 01H as well as by 3BH. 1) Bulk Dump Format for Key-by-Key Tuning Data F0H,43H,73H 3BH: Device ID (CLP'96:3BH) 06H: Bulk ID 00H: Bulk No. (Bulk dump format for key- specific tuning data) 00H,00H,0BH,00H: Data length [Bulk data]: low(A-1), high (A-1) ... low (C7), high (C7) [Checksum (1 byte)] = 0 - sum(bulk data) F7H: End Of Exclusive 2) Bulk Dump Format for Sequence Data F0H,43H,73H nnH: Device ID (CLP-811:40H; CLP-611:3EH) 06H: Bulk ID 05H: Bulk No. (Sequence-data bulk dump format) 0xH,0xH,0xH,0xH: Data length = xxxx bytes [Bulk data]: low,high,...,low,high [Checksum (1 byte)] = 0 - sum(bulk data) F7H: End Of Exclusive 3) Bulk Data Format for Organ Combination F0H,43H,73H 3BH: Device ID 06H: Bulk ID 06H: Bulk data format for organ combination 00H,00H,01H,01H: Data length = 11H bytes 0nH: n = Channel No. [16'] [8'] [5+1/3'] [4'] [2+2/3'] [2'] [1+1/3'] [1'] [Response] [Attack 4'] [Attack 2+2/3'] [Attack 2'] [Attack length] [Attack mode] (00H=FIRST; 01H=EACH) [Rotary-speaker speed] [Rotary-speaker depth] [Checksum (1 byte)] = 0 - sum(bulk data) F7H: End Of Exclusive 10. System Exclusive Message (Special operators) [F0H] → [43H] → [73H]→ [xxH] → [RRH] → [0nH] → [ccH] → [vvH] → [F7H] F0H: Exclusive status 43H: Yamaha 73H: Clavinova 3BH: Device ID (CLP'96n:3BH) RRH: SK special operator 0nH: cc: dd: F7H: Control MIDI Change (n = Special Operator Channel No.) Control No. Value End Of Exclusive Control SPLIT POINT METRONOME ON Always 00H Always 00H DAMPER LEVEL Ch:00~0FH CHANNEL DETUNING Ch:00~0FH VOICE RESERVE Ch:00~0FH ccH ddH 14H Split key No. 1BH 00H:OFF 01H: - 02H:2/4 03H:3/4 04H:4/4 05H:5/4 06H:6/4 7FH:Normal 3DH (Sets channelspecific piano damper level) 00H~7FH 43H (Sets channelspecific detuning) 00H~7FH 45H 00H:RESERVE OFF 7FH:ON *1 *1 When RESERVE=ON, received volume and expression data becomes effective at next Key ON. RESERVE=OFF is the normal setting. 11. Additional System Exclusive Message [F0H] → [43H] → [1nH]→ [27H] → [30H] → [00H]→ [00H] → [RRH]→ [ccH]→ [F7H] * This message changes master tuning for all channels. (If this and XG master-tuning message are both received then last received becomes effective.) 1) Master tuning [00H] → [mmH] → [RRH] → [ccH] F0H: Exclusive status 43H: Yamaha 1nH: (If transmission, n=0. If reception, n=0~F.) 27H: TG100 Device ID 30H: Sub-ID 00H: 00H: mmH: Master Tuning MSB RRH: Master Tuning LSB ccH: Any value up to 7FH. F7H: End Of Exclusive 52 CLP-811/611 MIDI Data Format/MIDI-Datenformat/Format de données MIDI/Formato de datos MIDI