Yamaha CVP-809 CVP-809/CVP-805 Owners Manual - Page 119
Insert the AC power cord plug into the [AC, contact with the floor surface.
View all Yamaha CVP-809 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Pass the pedal cord from under unit D to the backside of the main unit. 8 Insert the AC power cord plug into the [AC IN] jack. Place unit F on the bracket of unit D. Attach unit F to unit D using three screws M. 9 Rotate the adjuster until it comes in firm contact with the floor surface. M 7 Connect the pedal cord. Insert the pedal cord plug into the pedal connector. Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. 10 Attach the headphone hanger. Attach the headphone hanger using two screws P as shown in the illustration. P Correct Incorrect Pass the pedal cord between units D and E. Align the pedal cord into the groove on unit D, then install the cover onto the groove correctly. Attach unit G using two screws N. N G CVP-809B CVP-809PE N (CVP-809PWH) Attach two caps K. CVP-809PWH K After completing the assembly, please check the following. • Are there any parts left over? → Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? → Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? → Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? → Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? CVP-809/CVP-805 Owner's Manual 119 CVP-809 Assembly