Yamaha DSP-E800 Owner's Manual - Page 3

INTRODUCTION PREPARATION INTRODUCTION FEATURES The DSP-E800 makes it possible for you to enjoy advanced surround sound with a 5.1 channel system by connecting it to your present main amplifier. Built-in 3-Channel Power Amplification x Minimum RMS Output (0.06% THD, 20 Hz - 20 kHz) Center: 70 W (8 Ω) Rear: 70 W + 70 W (8 Ω) Multi-Mode Digital Sound Field Processing x Digital Sound Field Processor (DSP) x Dolby Pro Logic Decoder x Dolby Digital Decoder x DTS Decoder x CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or DTS Other Features x 96-kHz/24-bit D/A Converter x "SET MENU" which Provides You with 12 Items for Optimizing This Unit for Your Audio/Video System x Test Tone Generator for Easier Speaker Balance Adjustment x 6-Channel External Decoder Input for Other Future Formats x S Video Signal Input/Output Capability x 3 Optical/2 Coaxial Digital Signal Input Terminals x SLEEP Timer x Remote Control CONTENTS INTRODUCTION FEATURES 1 CONTENTS 1 GETTING STARTED 2 CONTROLS AND FUNCTIONS 4 PREPARATION SPEAKER SETUP 7 CONNECTIONS 8 ADJUSTING THE SPEAKER BALANCE 14 BASIC OPERATION PLAYING A SOURCE 16 DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT 20 RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE 21 ADVANCED OPERATION SOUND FIELD PROGRAM 22 SET MENU 25 DELAY TIME AND SPEAKER OUTPUT LEVELS 29 SLEEP TIMER 31 BASIC OPERATION ADVANCED OPERATION APPENDIX English Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992 - 1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. "DTS", "DTS Digital Surround", are trademarks of Digital Theater Systems, Inc. Copyright 1996 Digital Theater Systems, Inc. All Rights Reserved. APPENDIX TROUBLESHOOTING 32 SPECIFICATIONS 35 y indicates a tip for your operation. • When buttons on this unit and the remote control are noted together in this Owner's Manual, these button names are in principle noted in the order of "button name (remote control button name)". E-1