Yamaha DT50S Drum Trigger Module Setup Manual for DT50S/DT50K - Page 9

Update before Using (recommended) DTX502 Update before Using (recommended) There are two ways to update the firmware-a Windows application or an iOS app. If you are using Windows, search for "DTX502 Updater" on the web site below, download the DTX502 Updater application, and follow the steps on the firmware updater page to update the firmware. Yamaha Downloads: http://download.yamaha.com Updating with the iOS App (DTX502 Touch) Special Notices • When the update is installing, be sure not to remove the USB cable from the [USB TO HOST] terminal or turn off the drum trigger module. Failure to observe this precaution can result in the module being damaged. • A camera connector is required to connect the DTX502 to an iOS device. • If you are using a version of DTX502 Touch earlier than Version 2.*.*, update the DTX502 Touch app before updating the firmware. DTX502 Touch Version 2.*.* 1. Download the iPhone/iPad Connection Manual. 2. Connect the device containing the DTX502 Touch app to the DTX502 in accordance with the directions in the iPhone/iPad Connection Manual. 3. Open the DTX502 Touch app. The app will automatically confirm the current firmware version, and a message will appear prompting you to update it. Follow the steps displayed to update. Return to the Selecting a Setup Method section Selecting a Setup Method 9