Yamaha DVD-S663 Owner's Manual - Page 47

Troubleshooting English Problem No picture is displayed when you do not use progressive scan connections (using the component video jacks) Completely distorted picture, black/white picture, or no picture Distorted picture Picture freezes momentarily during playback HD JPEG pictures cannot be displayed The screen size looks unnatural, or the caption is displayed only partially on the TV monitor or is not displayed at all No sound or distorted sound No audio at digital output No sound during DivX® movie playback This unit does not respond to the remote control Solution Follow the steps below to turn off the progressive scan. 1. Press OPEN/CLOSE ( ) on the front panel or press and hold 7 on the remote control to open the disc tray. 2. Press 2 on the remote control. 3. Press ZOOM on the remote control to deactivate the progressive scan. Check that the disc is compatible with this unit (see "Playable disc formats" on page 4). Check that the TV type of this unit is set to match that of the disc and your TV (see "Setting a color system for your TV" on page 14). Follow the steps below to change the setting of [TV TYPE]. 1. Press OPEN/CLOSE ( ) on the front panel or press and hold 7 on the remote control to open the disc tray. 2. Press 3 on the remote control. 3. Press AUDIO on the remote control. Occasionally, a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction. Check the video connection. Check the disc for fingerprints/scratches and clean it with a soft cloth wiping from center to edge. For WMV/DivX®, lowering the bit rate may improve the problem. Check that [HD JPEG] is set to [ON] (see page 37). The disc reading time may exceed 30 seconds. MP3 music and HD JPEG pictures cannot be played simultaneously. Check that the TV setting of this unit matches the screen size of your TV (see "Setting the TV display" on page 33). Change the screen size and the aspect ratio of your TV. Adjust the volume. Check that the speakers are connected correctly. Check the audio connection. For MP3/WMA, check that the sampling rate and bit rate are compatible with this unit (see "Specifications" on page 48). For WMV/DivX®, record the file onto your USB device at a lower bit rate. Check the digital connections. If you are playing a DTS source, check that your receiver can decode DTS, and that [DIGITAL OUTPUT] is set to [ALL] (see page 32). Check that the audio format of the selected audio language matches your receiver capabilities. The audio code may not be supported by this unit. Aim the remote control directly at the remote control sensor on the front panel. Reduce the distance of the remote control from this unit. Replace the batteries in the remote control. Reinsert the batteries with their polarities (+/- signs) as indicated. 43 En