Yamaha EF6300iSDE Owners Manual - Page 44

Engine, Store the generator in a dry, well-ventilated place

Get Yamaha EF6300iSDE - 5500 Watt Inverter Generator PDF manuals and user guides View all Yamaha EF6300iSDE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

AE00889 Engine Perform the following steps to protect the cylinder, piston ring, etc. from corrosion. 1. Remove the spark plug cap and spark plug, pour about one tablespoon of SAE 10W30 or 20W40 motor oil into spark plug hole and reinstall the spark plug only. 2. Turn the engine switch to "START" and crank the engine several seconds with ignition off to coat the cylinder walls with oil. 3. Clean exterior of the generator and apply a rust inhibitor. 4. Store the generator in a dry, well-ventilated place, with the cover placed over it. 712-7XF 5. The generator must remain in a vertical position when stored, carried or operated. The caster lock lever should be in the "Lock" when stored or operated. 788-7XFg - 39 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
– 39 –
AE00889
Engine
Perform the following steps to protect the cylinder, pis-
ton ring, etc. from corrosion.
1.
Remove the spark plug cap and spark plug, pour
about one tablespoon of SAE 10W30 or 20W40
motor oil into spark plug hole and reinstall the
spark plug only.
2.
Turn the engine switch to “START” and crank the
engine several seconds with ignition off to coat the
cylinder walls with oil.
3.
Clean exterior of the generator and apply a rust
inhibitor.
4.
Store the generator in a dry, well-ventilated place,
with the cover placed over it.
712-7XF
788-7XFg
5.
The generator must remain in a vertical position
when stored, carried or operated. The caster lock
lever should be in the “Lock” when stored or oper-
ated.