Yamaha EMX512SC Owner's Manual - Page 22
Digital Effects PROGRAM dial, PARAMETER knob, ON switch, EFFECT OUT jack, FOOT SW jack - powered mixer used
UPC - 086792831329
View all Yamaha EMX512SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Controls and Connectors Digital Effects Section 0 A B C D 0 PROGRAM dial Selects the type of effect to be used. You can select from 16 different effect types, as follows. No. Program 1 REVERB HALL 1 2 REVERB HALL 2 3 REVERB ROOM 1 4 REVERB ROOM 2 5 REVERB STAGE 1 6 REVERB STAGE 2 7 REVERB PLATE 8 DRUM AMBIENCE Parameter REVERB TIME REVERB TIME REVERB TIME REVERB TIME REVERB TIME REVERB TIME REVERB TIME REVERB TIME No. Program 9 KARAOKE ECHO 0 VOCAL ECHO A CHORUS 1 B CHORUS 2 C FLANGER D PHASER E AUTO WAH F DISTORTION Parameter DELAY TIME DELAY TIME LFO FREQ LFO FREQ LFO FREQ LFO FREQ LFO FREQ DRIVE A PARAMETER knob Adjusts the parameter (depth, speed, etc.) associated with the selected effect type. NOTE The mixer saves the last value used with each effect type. When you change to a different effect type, the mixer automatically restores the value that was previously used with that type (regardless of the current position of the PARAMETER knob). But note that all values return to their defaults at power-off. B ON switch Switches use of the internal effector on or off. The internal effect is applied only if this switch is on. Note that the lamp above the switch lights up orange to indicate that the switch is on. As an alternative to the ON switch, you can use a separately sold FC5 foot switch to toggle the effector on and off. NOTE The internal effector is automatically turned on whenever you switch on the mixer's power. C EFFECT OUT jack This unbalanced phone output jack outputs the signal from the EFFECT bus. You can use this jack to output the signal to an external effector. You can then return the signal by connecting the external effector to any of the LINE jacks on channel pairs 5/6 to 11/12. If you are returning a signal from an external effector into a LINE jack on any channel pair 5/6 to 11/12, please be sure to turn the EFFECT knob for that channel pair to "0". D FOOT SW jack This phone input jack can connect to the (separately sold) YAMAHA FC5 foot switch. With the foot switch connected, you can use your foot to toggle the internal effector ON and OFF. 22 EMX512SC/EMX312SC/EMX212S