Yamaha HTR-5560 Owners Manual - Page 32

BASIC PLAYBACK I Playing Dolby Digital Surround EX or DTS ES software Press EX/ES to turn on the Dolby Digital EX or DTS-ES compatible decoder. The MATRIX indicator lights up. EX/ES MATRIX I SILENT CINEMA DSP You can enjoy a powerful sound field similar to what you could expert from actual speakers with SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Enjoy all the DSP program using the headphones. The "SILENT" indicator lights up on the front panel display. (When sound effects are off, you listen to the source with normal stereo reproduction.) VCR2/DVR VCR1 V-AUX D-TV/CBL DVD MD/CD-R TUNER +10 DIGITAL MOVIE THTR 1 DSP Spectacle EX The display changes AUTO → Matrix6.1 → OFF each time the EX/ES button is pressed. AUTO: This mode automatically switches Dolby Digital EX and DTS-ES compatible depending on the signal. Rear center speaker does not work for 5.1 channel sources. This setting produces 6-channel playback of the input source using the Dolby Digital EX or DTS-ES compatible decoder. The rear center speaker can be used when playing a 5.1-channel source. Rear center speaker does not work in this setting. (Except for when the DSP program "6ch" is selected.) Notes • This feature is not available when 6CH INPUT is selected or 96-kHz sampling digital signals are input to this unit. • The sound of LFE channel will be mixed and output from the headphone. I Normal stereo reproduction Matrix6.1: 1 Press STEREO to turn off the sound effect for normal stereo reproduction. Press STEREO again to turn the sound effect back on. STEREO STEREO OFF: or EFFECT ENTER EFFECT Front panel Remote control Notes • No sound will be output from the rear center speaker if you have set "1C REAR LR" or "1D REAR CT" on the SET MENU to NON. • The setting becomes AUTO once this unit turns into standby mode. • Some Dolby Digital Surround EX or DTS ES software may not contain the signal that is necessary for this unit to switch to the Dolby Digital EX or DTS-ES compatible decoding mode. To turn on the decoder when playing such a source, select "Matrix6.1". Notes • If you turn off the sound effects, no sound is output from the center speaker, rear speakers, or rear center speaker. • If you turn off the sound effects while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers. • The volume may be greatly reduced when you turn off the sound effects or if you set "4 D. RANGE" on the SET MENU to MIN. In this case turn on the sound effect. • The sound of LFE channel will be directed to the main left and right or the subwoofer (or both) channels depending on the setting of "1E BASS" on the SET MENU. I Virtual CINEMA DSP With Virtual CINEMA DSP, you can enjoy all DSP programs without rear speakers. It creates virtual speakers to reproduce a natural sound field. You can listen to virtual CINEMA DSP by setting "1C REAR LR" in the SET MENU to NON. Sound field processing changes to VIRTUAL CINEMA DSP automatically. y During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this unit. Note • This unit is not set in the virtual CINEMA DSP mode even if "1C REAR LR" is set to NON in the following cases: - when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic Normal, Pro Logic , or DTS Normal program is selected; - when the sound effect is turned off; - when 6CH INPUT is selected as the input source; - when 96-kHz sampling digital signals are input to this unit; - when using the test tone; or - when connecting the headphones. (While playing a source) 1 2 Press AMP. Press d to display the information about the input signal. PRESET/CH - SELECT + 28