Yamaha HTR-5560 Owners Manual - Page 43

RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. Notes • Do a test recording before you start an actual recording. • When this unit is set in the standby mode, you cannot record between the components connected to this unit. • The setting of BASS, TREBLE, VOLUME, "5 L/R BALANCE" on the SET MENU and DSP programs does not effect the recorded material. • A source connected to the 6CH INPUT jacks on this unit cannot be recorded. • A given input source is not output to the same OUT (REC) channel. (For example, the signal input from VCR 1 IN is not output to VCR 1 OUT.) • Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws. INTRODUCTION 1 INPUT M0DE 2 INPUT VOLUME 6CH INPUT NATURAL SOUND AV RECEIVER PRESET/TUNING FM/AM STANDBY /ON EDIT TUNING MODE MEMORY PREPARATION AUTO/MAN'L MONO MAN'L/AUTO FM BASS SILENT TREBLE VIDEO AUX SPEAKERS A B STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES - + - + S VIDEO VIDEO L AUDIO R OPTICAL CODE SET TRANSMIT SYSTEM POWER TV CD POWER AV MD/CD-R STANDBY POWER TUNER SLEEP 2 DVD D-TV/CBL V-AUX 6CH INPUT If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. BASIC OPERATION VCR 1 VCR2/DVR A AMP + TV VOL + TV CH + VOLUME - TV MUTE - TV INPUT - MUTE ROCK CONCERT ENTERTAINMENT I Special considerations when recording DTS software The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made. For LDs, DVDs and CDs encoded with DTS, when your player is compatible with the DTS format, follow its operation instruction to make a setting so that the analog signal will be output from the player. HALL JAZZ CLUB 1 2 Turn on the power of this unit and all connected component. Select the source component you want to record from. CD MD/CD-R TUNER SLEEP ADVANCED OPERATION INPUT DVD D-TV/CBL V-AUX 6CH INPUT or VCR 1 VCR2/DVR A AMP I Timer playback/recording Front panel Remote control ADDITIONAL INFORMATION 3 4 Start playback (or select a broadcast station) on the source component. Start recording on the recording component. This unit can perform playback or recording with an external timer (not supplied). Refer to the operating instructions for the component and the timer to be used. Notes • Stored data, such as input source, will be reflected when playback or recording with the timer. • If you do not want any sound output when recording with a timer, turn the volume down. APPENDIX English Memory back-up The memory back-up circuit prevents the stored data (input source, volume level, set menu settings and so on) from being lost even if this unit is disconnected from the AC outlet. However, if the timer is turned off for more than one week, the stored data will be lost. 39