Yamaha HTR-5660 Owners Manual - Page 43

6 Press j / i once to enter PRESET/CH the setup mode of the selected item. - SELECT + The last setting you adjusted appears on the front panel display. PRESET/CH Depending on the menu item, press u/d to select a sub - SELECT + item. 7 Press j / i repeatedly to PRESET/CH change the menu item setting. - SELECT + 8 Press u / d repeatedly until the menu disappears or just press one of the DSP program group buttons to exit from the set menu. PRESET/CH - SELECT + or HALL 1 JAZZ CLUB 2 ROCK CONCERT 3 ENTERTAINMENT 4 MUSIC VIDEO 5 TV MOVIE MOVIE THEATER THEATER 1 THEATER 2 6 7 8 /DTS SUR. 9 NIGHT 0 6.1/5.1 +10 STEREO ENTER EFFECT Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If this happens, adjust the items again. SET MENU SOUND 1 SPEAKER SET (speaker mode settings) Use this feature to select suitable output modes for your speaker configuration. Note • Some menu item settings have no effect when the unit is reproducing a source with a digital signal sampling frequency greater than 48 kHz. I 1A CENTER (center speaker mode) If you add a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images. Choices: LRG (large), SML (small), NON (none) LRG Select this if you have a large center speaker. The unit directs the entire range of the center channel signal to the center speaker. SML Select this if you have a small center speaker. The unit directs the low-frequency signals (90 Hz and below) of the center channel to the speakers selected with "1E BASS". NON Select this if you do not have a center speaker. The unit directs all of the center channel signal to the main left and right speakers. The BASIC and SOUND menus The "BASIC" menu allows you to easily set the "SOUND 1 SPEAKER SET" and "SOUND 2 SP DISTANCE" parameters. It is not necessary to reset any of the parameters in the "BASIC" menu, but you can access more detailed parameters in the "SOUND" menu if you wish. Note • After altering parameters in the "SOUND" menu, if you select "BASIC 1 SETUP" and then select "SET", the parameters from the "SOUND" menu alter in response to any changes you make in "BASIC 1 SETUP". Do not enter the "BASIC 1 SETUP" menu unless you wish to change these settings. If you accidentally enter the "BASIC 1 SETUP" menu, select CANCEL to return to the "BASIC" menu. (page 20) ADVANCED OPERATION English 39