Yamaha HTR 5830 MCXSP10 Manual - Page 21

Front A speaker Right Left 1 2 Surround speaker Right Left 5 6 CONNECTIONS 6CH INPUT FRONT AUDIO R L VIDEO DVD TUNER DIGITAL INPUT CD 3 SURROUND SUB WOOFER COAXIAL OPTICAL DTV /CBL 2 DVD 1 CD IN (PLAY) MD /CD-R OUT (REC) R CENTER L DTV /CBL V-AUX IN VCR OUT SUB WOOFER AM ANT GND FM ANT 75Ω UNBAL. MONITOR OUT AUDIO OUTPUT COMPONENT VIDEO Y PB PR MONITOR OUT DVD DTV /CBL A R FRONT L SPEAKERS SURROUND R L CLASS 2 WIRING B FRONT R L CENTER PREPARATION 4 Subwoofer with built-in amplifier Right Left Front B speaker 3 Center speaker FRONT SPEAKERS terminals You can connect up to two speaker systems to these terminals. When using only one speaker system, connect it to either of the FRONT A or the FRONT B terminals. SURROUND SPEAKERS terminals A surround speaker system can be connected to these terminals. CENTER SPEAKER terminals A center speaker can be connected to these terminals. 31 4 2 5 6 The diagram shows the speaker layout in the listening room. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the front, center and/or surround channels to this jack in accordance with your SPEAKER SET selections. The LFE (lowfrequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER SET selections. Notes • The cut-off frequency of the SUBWOOFER jack is 90 Hz. • If you do not use a subwoofer, allocate the signals to the front left and right speakers by changing the setting of "SOUND 1 SPEAKER SET" item "1D BASS" on the set menu to FRONT. • Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit's remote control (see "SETTING THE SPEAKER LEVELS" on page 50). 17