Yamaha HTR 6060 MCXSP10 Manual - Page 109

SPECIFICATIONS Specifications AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 1 kHz, 0.7% THD, 8 105 W • Dynamic Power (IHF) Front L/R, 8/6/4/2 120/155/190/235 W • Maximum Output Power [Europe model] 1 kHz, 0.7% THD, 4 140 W • Dynamic Headroom 8 1.4 dB • IEC Output Power [Europe model] Front L/R, 1 kHz, 0.06% THD, 8 100 W • Damping Factor (IHF) Front L/R, SPEAKERS A, 20 Hz to 20 kHz, 8 120 or more • Input Sensitivity/Input Impedance PHONO (MM 3.5 mV/47 kΩ CD, etc 200 mV/47 kΩ MULTI CH INPUT 200 mV/47 kΩ • Maximum Input Voltage PHONO (MM) 1 kHz, 0.1% THD 60 mV or more CD, etc. Effect On, 1 kHz, 0.5% THD 2.3 V or more • Rated Output Voltage/Output Impedance OUT (REC 200 mV/1.2 kΩ PRE OUT 1.0 V/1.2 kΩ SUBWOOFER (2ch Stereo, FRONT SP: SMALL 1.0 V/1.2 kΩ • Headphone Jack Rated Output/Impedance CD, etc. (1 kHz, 50 mV, 8 150 mV/100 Ω • Frequency Response CD to Front L/R, 10 Hz to 100 kHz 0/-3 dB • RIAA Equalization Deviation PHONO (MM 0 ± 0.5 dB • Total Harmonic Distortion PHONO (MM) to OUT (REC) 20 Hz to 20 kHz, 1 V 0.02% or less CD, etc. to Front L/R 2ch Stereo, 20 Hz to 20 kHz, 50 W, 8 0.06% or less • Signal to Noise Ratio (IHF-A Network) PHONO (MM, 5 mV) to Front L/R [U.S.A. and Canada models 86 dB or more [Europe model 81 dB or more CD, etc. (Effect Off, 250 mV) to Front L/R 100 dB or more • Residual Noise (IHF-A Network) Front L/R 150 µV or less • Channel Separation (1 kHz/10 kHz) PHONO (shortened) to Front L/R 60 dB/55 dB or more CD, etc. (5.1 kΩ shortened) to Front L/R 60 dB/45 dB or more • Tone Control (Front L/R) BASS Boost/Cut 10 dB/50 Hz BASS Turnover Frequency 350 Hz TREBLE Boost/Cut 10 dB/20 kHz TREBLE Turnover Frequency 3.5 kHz • Volume Control MUTE/-80 dB to 16.5 dB • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F. (FRONT SP, CENTER SP, SUR. L/R SP, SUR. B L/R SP: SMALL/SML 12 dB/oct. L.P.F. (Subwoofer 24 dB/oct. VIDEO SECTION • Video Format (Gray Back) [U.S.A. and Canada models NTSC [Europe model PAL • Video Format (Video Conversion NTSC/PAL • Signal Level Composite 1 Vp-p/75 Ω S-video 1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C) Component 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR) • Maximum Input Level (Video Conversion Off 1.5 Vp-p or more • Signal to Noise Ratio 50 dB or more • Frequency Response (MONITOR OUT) Component (Video Conversion Off 5 Hz to 60 MHz, -3 dB FM SECTION • Tuning Range [U.S.A. and Canada models 87.5 to 107.9 MHz [Europe model 87.50 to 108.00 MHz • 50 dB Quieting Sensitivity (IHF) Mono 2.8 µV (20.2 dBf) • Signal to Noise Ratio (IHF) Mono/Stereo 73 dB/70 dB • Harmonic Distortion (1 kHz) Mono/Stereo 0.5% • Antenna Input (unbalanced 75 Ω AM SECTION • Tuning Range [U.S.A. and Canada models 530 to 1710 kHz [Europe model 531 to 1611 kHz GENERAL • Power Supply [U.S.A. and Canada models AC 120 V, 60 Hz [Europe model AC 230 V, 50 Hz • Power Consumption [U.S.A. and Canada models 380 W/480 VA [Europe model 390 W • Standby Power Consumption 0.1 W or less • AC Outlets [U.S.A. and Canada models 2 (Total 100 W maximum) [Europe model 2 (Total 50 W maximum) • Dimensions (W x H x D 435 x 171 x 393 mm (17-1/8 x 6-3/4 x 15-1/2 in) • Weight 11.6 kg (25 lbs 9 oz) * Specifications are subject to change without notice. ADDITIONAL INFORMATION English 105 En