Yamaha IM8-24 Owner's Manual - Page 20
Troubleshooting
View all Yamaha IM8-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Troubleshooting Troubleshooting Power doesn't come on. • Is the dedicated PW8 power supply properly plugged into an appropriate AC power outlet? • Is the dedicated PW8 power supply properly connected using the included power supply cable? The PW8 itself will not power-on unless it is correctly connected via the included power cable. • If the above checks do not identify the problem, call Yamaha for service. The sound of the bass drum will not move forward in the mix. • Could you be mixing a phase-reversed signal? Try turning on the switch to reverse the phase. If you are capturing the sound using multiple mics, phase reversal may be causing cancellation. How can I send the pre-EQ signal to an AUX bus for monitoring? • You can send the pre-EQ signal to an AUX bus by changing an internal jumper setting. Turn the AUX PRE switch on (pre-fader). In this case, the signal will be sent to the AUX bus even if the input channel's ON switch is off. How can I monitor the signal of a GROUP bus before I send it to the ST L/R bus? • With the GROUP section ON switch turned off, turning the GROUP section AFL switch on will let you monitor the AFL signal of the GROUP bus without sending it to the ST L/R (and MONO) bus. How can I send a compressed signal to the ST L/R bus while sending the uncompressed signal to DIRECT OUT jacks for recording? • If you connect a compressor (external device) to the INSERT jacks and apply compression to the signal being sent to the ST L/R bus, the signal before the compressor will be sent to the DIRECT OUT jacks. In this case, turn off the IM8's COMP control. How can I send the TALKBACK signal only to the intercom? • In the TALKBACK section, turn on only MATRIX 1-2 (or MATRIX 3-4) to send the output of MATRIX 1-2 (or MATRIX 3-4) to the intercom. How can I play background music from a portable audio player? • A standard mini-phone type 2TR IN jack is provided on the front panel, allowing you to connect your portable audio player via a mini-plug cable. How can I assign the MC to the MONO bus and also record it? • Assign the MC's input channel to the MONO bus, and use the REC OUT section bus assign switch to select the MONO bus. 20 Owner's Manual