Yamaha KX-580 Owner's Manual - Page 4

This owner's manual covers 3 models of YAMAHA cassette deck KX-580, KX-480 and KX-380. Please check which model you have purchased and read the descriptions concerned. There may be some unnecessary items, so please skip them accordingly. TABLE OF CONTENTS FEATURES 4 CONNECTIONS 4 PLAYBACK 5 SELECTION SEARCH 7 INTRO SCAN 7 MEMORY STOP operation 8 REPEAT PLAYBACK (KX-580 and KX-480 only 8 RECORDING 9 REC MUTE operation 12 0-STOP operation 12 REC RETURN operation 12 TIMER RECORDING/PLAYBACK (KX-580 and KX-480 only 13 Timer recording 13 Timer playback 13 CASSETTE TAPES 14 OPENING AND CLOSING THE SUB PANEL ( KX-580 and KX-480 only 15 OPTIONAL REMOTE CONTROL TRANSMITTER 15 MAINTENANCE 15 TROUBLESHOOTING 16 SPECIFICATIONS 17 FEATURES ÷ Dolby HX Pro Dynamic Bias Servo ÷ Dolby B/C and S (KX-580 only) Noise Reduction ÷ Secure Holding Damper Cassette Stabilizer allows you to reduce unwanted vibration and modulation noise (KX-580 and KX-480 only). ÷ Fine Adjustment of Recording Characteristics with Auto Tape Tuning and Bias Adjust Control ÷ 160 kHz High Recording Bias prevents cross modulation beat distortion that can occur between the recording bias and the recording signal's high frequency content (KX-580 and KX-480 only). ÷ Play Trim Control for improved playback compatibility with other decks ÷ 0-M/FULL Repeat Playback (KX-580 and KX-480 only), Selection Search and Bi-Directional Intro Scan ÷ Recording Mute function CONNECTIONS L R LINE IN REC LINE OUT PLAY REC OUT L TAPE PB R Amplifier or receiver 4 To an AC outlet REAR PANEL CONNECTIONS Make sure that power to both the deck and your amplifier/receiver are turned off before making any connections. ÷ The White plug on the paired connecting cables corresponds to the Left channel and the Red plug corresponds to the Right channel. Make sure that the left and right channel connections are properly made, and that the plugs are inserted firmly. ÷ The LINE OUT/PLAY jacks on the deck should be connected to the Tape PB (Playback/Input) jacks on your amplifier/ receiver, and the LINE IN/REC jacks on the deck should be connected to the Rec Out (Rec/Output) jacks on your amplifier/receiver. ÷ Connect the power cord to an AC wall outlet or to an AC outlet on the rear panel of your amplifier/receiver (if provided).