Yamaha KX-580 Owner's Manual - Page 6

To stop playback: Press the STOP button. To fast forward the tape: Press the ⁄ button. To fast rewind the tape: Press the ! button. To adjust the volume level: Use the volume control of the amplifier or receiver. To use headphones for private listening: Insert the headphones plug into the PHONES jack. To adjust the headphones level: Use the PHONES LEVEL control. DOLBY NR button setting (in step 2) DOLBY NR (OFF/ŸB/ŸC/MPX) button Be sure to set the DOLBY NR (OFF/ŸB/ŸC/MPX) button according to the system used for recording. Each time this button is pressed, Dolby NR switches as follows: 3ŸB(MPX off) For a tape recorded with DOLBY B NR Only the ŸB indicator lights. ∞ ŸC(MPX off) For a tape recorded with DOLBY C NR Only the ŸC indicator lights. ∞ ŸB MPX on (available only for recording) ∞ ŸC MPX on (available only for recording) ∞ OFF For a tape recorded with DOLBY NR OFF No indicator lights. KX-580 only DOLBY NR (OFF/ŸS/MPX) button For a tape recorded with DOLBY S NR, use this button to select the appropriate setting. Each time this button is pressed, DOLBY NR switches as follows: 3ŸS(MPX off) ∞ ŸS MPX on ∞ OFF For a tape recorded with DOLBY S NR Only the ŸS indicator lights. (available only for recording) For a tape recorded with DOLBY NR OFF No indicator lights. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol Ÿ are trademarks of Dolby Laboratories Licensing Corporation. Note: The MPX filter settings are explained on page 10. DOLBY S NR DOLBY S NR is developed incorporating the concept of professional-use DOLBY SR system into the present DOLBY B/C NR. It offers the noise reduction effect increased by about 40%, compared to the former DOLBY C NR, and also the noise level of the low frequency range is reduced to 1/3. Highly natural sound can be reproduced with the help of the modulation controller, which regulates 5 NR units - 2 for low level sounds and 3 for high level, one of which is for low frequency signals. DOLBY S NR has also high interchangeability. The tapes recorded with DOLBY S NR can well be reproduced by the decks which are equipped only with DOLBY B NR, headphone stereos or car stereos for example. Noise Reduction Responce 20 100 NR-OFF B-NR 10 dB C-NR S-NR 1k 10k 20k Hz PLAY TRIM control adjustment When the level of high frequencies is too boosted or absent while playing a tape recorded on another cassette deck, adjust the high frequency response with the PLAY TRIM control. When high frequencies are too boosted, attenuate the high frequencies. PLAY TRIM When high frequencies are absent, boost the high frequencies. PLAY TRIM 0 0 - + - + 10 dB 100 1k 1+ _2 3 10kHz 1 High frequency sound is too boosted. 2 Flat. 3 High frequency sound is absent. 6