Yamaha KX-580 Owner's Manual - Page 8

KX-580/KX-480 REPEAT 0-M/FULL indicator MEMORY indicator (KX-580 only) PLAY KX-380 MEMORY indicator COUNTER RESET REPEAT OFF /0-M/FULL MEMORY button !⁄ MEMORY button !⁄ MEMORY STOP operation - To return to the desired position Pressing the MEMORY button memorizes the desired counter reading. The MEMORY indicator lights. MEMORY During fast forwarding or rewinding, the tape will stop at the counter reading point where the 3 MEMORY button was pressed. ! ⁄ or To cancel the memorized counter reading, press the MEMORY button again. The MEMORY indicator goes out. MEMORY REPEAT PLAYBACK ( KX-580 and KX-480 only) 0-M (a section) repeat With this function, a desired section can be played repeatedly up to 8 times. 1 Press the REPEAT OFF/0-M/FULL button so that the REPEAT 0-M indicator lights. REPEAT OFF/0-M/FULL Full repeat With this function, the cassette side being played can be repeated up to 8 times. Press the REPEAT OFF/0-M/FULL button so that the REPEAT FULL indicator lights. REPEAT OFF/0-M/FULL PLAY 3 2 Press the RESET button at the beginning of the section you want to play repeatedly. The counter on the display is reset to "0000". RESET 3 Press the MEMORY button at the end of the section during playback. The MEMORY indicator on the display lights up, and the tape immediately begins rewinding. MEMORY Note: The length between the start and end points of the 0-M repeat section should be more than 4 counts. To cancel repeat playback To cancel the 0-M repeat or Full repeat, press the REPEAT OFF/0-M/FULL button so that both REPEAT 0-M and REPEAT FULL indicators go off. Each time this button is pressed, repeat mode switches as follows: 3 0-M repeat 3 Full repeat 3 OFF The tape is rewound until the counter has returned to the beginning of the section. The deck then enters the playback mode and the specified section is played repeatedly. 8