Yamaha LS9-32 Ls9 Editor Owner's Manual - Page 53

A Mount Select a GEQ module or effect module for mounting in the rack, from the following choices. BLANK 31 Band GEQ Flex15GEQ EFFECT No assignment 31-band 1-in/1-out graphic equalizer 2-in/2-out graphic equalizer that allows any fifteen of the 31 bands to be controlled Internal effect (only for RACK 5-8) B Input patch Select the input port(s) that will be assigned to the rack, from the following choices. NONE MIX1-16(*) MATRIX1-- 8(*) ST L, ST R, MONO(C)(*) INS CH 1-32 INS MIX 1-16 INS MATRIX1-8 INS ST L, INS ST R, INS MONO(C) No assignment MIX channel 1-16 MATRIX channel 1-8 STEREO channel L/R, MONO channel INPUT CH 1-32 insert out MIX channel 1-16 insert out MATRIX channel 1-8 insert out Insert-out of STEREO channel L/R or the MONO channel (*) Selectable only for effect modules. This is not shown if nothing is mounted in the rack. C Module graphic This area shows a graphic of the GEQ module or effect module that is currently assigned to the rack, and the parameters of that module. You cannot edit the parameters in this screen. Double-click this to open the module editor for that rack unit. By holding down the (< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the LS9-32 itself. D Input meter/Output meter These indicate the level of the signals being input and output from the rack. E Output patch Select the output port(s) that will be assigned to the rack, from the following choices. NONE IN CH 1-64(*1)(*2) STIN1L-STIN4R(*2) INS CH 1-32 INS MIX 1-16 INS MTRX1-INS MTRX8 INS ST L, INS ST R, INS MONO(C) No assignment INPUT jacks 1-64 (*1) L/R channels of ST IN jacks 1-4 INPUT CH 1-32 insert in MIX channel 1-16 insert in MATRIX channel 1-8 insert in Insert-in of STEREO channel L/R or the MONO channel (*1) INPUT CH 33-64 can be displayed only if you're editing offline and have selected LS9-32 in the Model Select field of the Mixer Setup window, or if you are editing online with the LS9-32 connected. (*2) Selectable only for effect modules. F ON, BYPASS This switches the GEQ module or effect module between active and bypassed states. A GEQ module is active when the ON button is lit. An effect module is active when the BYPASS button is dark. 53 LS9 Editor Owner's Manual