Yamaha M7CL M7cl V2 Editor Installation Guide - Page 3

M7CL V2 Editor The M7CL V2 Editor (subsequently called M7CL Editor) enables you to prepare the M7CL version 2 mixing console (M7CL-48 and M7CL-32: subsequently called M7CL) settings beforehand by editing the parameters offline, and also remotely monitor/control the M7CL online. Installing the Software Procedures 1 Verify that your system meets the operating requirements of each software program. 2 Install the appropriate driver to your computer. 3 Install the Studio Manager and each editor. 4 Start up the Studio Manager, then start up the editor. Windows page 3 page 4 page 5 page 8 For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program. Software installation Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system. OS Hard Disk Display Other Windows XP Professional SP2 or later/XP Home Edition SP2 or later/Vista (32-bit) 30MB or more 1024 x 768 pixels or higher; High Color (16-bit) or higher Pointing device such as a mouse, Ethernet (100BASE-TX/10BASE-T) port Windows XP Professional SP2 or later/XP Home Edition SP2 or later CPU Available Memory 1GHz or higher Intel Core/Pentium/Celeron family processor 512MB or more Windows Vista (32-bit) CPU Available Memory 1.4GHz or higher Intel Core/Pentium/Celeron family processor 1GB or more n The Minimum System Requirements described above are applied to the M7CL V2 Editor version 2.5.0. Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version information of each program and its system requirements at the following website http://www.yamahaproaudio.com/ The system requirements may differ slightly depending on the particular computer. M7CL V2 Editor Installation Guide 3