Yamaha M7CL M7cl V3.5 Supplementary Manual - Page 7

Improved EQ operation If you have selected a LOW band or HIGH band whose type can be switched, you can switch the type by turning the EQ[Q] encoder while pressing it when the Q is set to the maximum or minimum value. LOW band: • When Q is at the minimum value, you can switch to LOW shelving by turning the encoder to the right while pressing it. • When Q is at the maximum value, you can switch the band to high-pass filter by turning the encoder to the left while pressing it (MIX, MATRIX, STEREO, and MONO channels only). HIGH band: • When Q is at the minimum value, you can switch to HIGH shelving by turning the encoder to the right while pressing it. • When Q is at the maximum value, you can switch the band to low-pass filter by turning the encoder to the left while pressing it. For shelving, high-pass filter, and low-pass filter as well, you can switch the type by turning the encoder while pressing it. Added a File Load option You can now choose whether the AUTO CONFIGURE settings will be applied to the console when loading an M7CL settings file (*.M7C). This selection also applies when using the STAGE BOX DATA CONVERSION dialog box to convert and load a file. q q [WITH AUTO CONFIGURE SETTING] button If you press this button to turn it on, AUTO CONFIGURE settings saved in an M7CL settings file (*.M7C) will be applied to the console when the file is loaded. Other Changed index color of knobs in the screen The PRE/POST status is now indicated by the index color of the SEND LEVEL knobs shown in the OVERVIEW screen, the SELECTED CHANNEL VIEW screen, and the MIX/MATRIX SEND popup window. PRE (white) POST (black) 7